Technical Imformation
Pack size: 1l & 5l
No of components Single pack
Touch drying time 60 - 90 minutes at 25ºC and 70% relative humidity
Light foot traffic 6 hours after final coat
Full serviceability after 12 hours
Full cure 3 - 4 days to reach final strength
Overcoating time Ideal: 60 – 90 minutes at 25ºC and 70% relative humidity
Percentage solids ~70% by mass
Percentage VOC ~285g/l
Tensile strength at break 29MPa (ASTM D638)
Elongation at break 175% (ASTM D638)
Service temperature -40ºC to 120ºC
Application temperature 10ºC to 35ºC
Hardness 95 Shore A
Weathering no change after 1000 hours QUV
Specific Gravity 0,93 g/cm3
Viscosity 68 to 72 ku (QC RELEASE SPEC)
75 to 85 ku (AFTER 30 DAYS IN TIN)
Flash point >27°C
Explosive limits lower: 2,1 % by vol
upper: 11, 5% by vol
Hazardous reactions Exothermic reaction with amines, alcohols, acids and alkalis in uncured state. Reacts with water forming CO2 gas.
Open pressurized containers carefully, to release pressure.
Toxicity Toxic in uncured state
Thinning Duram Solvent, Toluene, Xylene
Cleaning the coating hot soapy water, methylated spirits
Shelf life 18 months
Storage conditions Cool dry place below 25ºC