Durapond

        SURFACEPREPARATION

Surfaces to be waterproofed must be clean, sound, dry (lessthan 10%moisture content where applicable) and free of all surfacecontamination such as form release agents, curing compounds, oil, grease and dust. Damage to the substrate must first be repaired. Remove any sharp protrusions that may damage the Durapond.
•       Cementitious and brick surfaces: Durapond can be applied directly to cement, stone, brick and fibre-cement provided they are completely dry and clean. Cement should be allowed to hard cure for at least 28 days before applying Durapond. Where the substrate is not completely dry or where rising damp is expected, prime with Duram Duraprime epoxy primer as per instructions. Where Duraprime has been used, apply Durapond when the Duraprime is touch dry (approx. 2 hours), but for best adhesion do not allow the Duraprime to hard cure (24 hours). Duraprime is not colourfast and therefore should not be used in conjunction with clear Durapond.